CDD1000-M700 low noise full electric paper roll lifter
CDD1000-M700
The electronic coil lifting forklift trucks of the CDD line are produced in 2 different versions, with a lifting capacity of 1,000 and 1,500 kg. Especially suitable for handling coils of large diameter, all the controls are located on the handle.
Operator's anti-crushing device. Protecting the drive wheel. Locking the engine which acts as a parking brake. Rechargeable batteries powered with built-in battery charger. Fall valve built-in into the cylinder.
Operator's anti-crushing device. Protecting the drive wheel. Locking the engine which acts as a parking brake. Rechargeable batteries powered with built-in battery charger. Fall valve built-in into the cylinder.
Quantity:
The electronic coil lifting paper roll lifter of the CDD line are produced in 2different versions, with a lifting capacity of 1,000 and 1,500 kg. Especially suitable for handling coils of large diameter, all the controls are located on the handle.
Operator’s anti-crushing device. Protecting the drive wheel. Locking the engine which acts as a parking brake. Rechargeable batteries powered with built-in battery charger. Fall valve built-in into the cylinder.
In case of failure of the hydraulic pipes, the coil holder is not lowered.
Single-acting lifting hydraulic cylinder. Coil holder flatbed equipped with a stop plate
activated through a hydraulic control that allows keeping the coil locked
during transport.
Emergency device for stopping the machine with pushbutton control.
All models can be equipped with an (optional) lateral displacement.
| Model | CDD1000-M700 | CDD1500-M700 |
| Maximum capacity | 1,000 Kg | 1,500 Kg |
| Lift height | 1,300 mm | 1,300 mm |
| Max coil diameter | 1,100 mm | 1,200 mm |
| Minimum ground clearance | 140 mm | 140 mm |
| Battery power | 24V – 150 Ah | 24V – 150 Ah |
